Hydraulic Adapter; MJIC x MORB 90*

A 90° hydraulic adapter that connects a 37° male JIC (SAE J514) flare end to an adjustable male O-ring boss (ORB, SAE J1926) port. Use it to turn a hose or tube line 90° into a port on pumps, valves, cylinders and manifolds where a straight fitting won't clear. The ORB end has a jam nut, backup washer and O-ring, so you can point the JIC end in the direction you need before locking it in place.

Specifications

• JIC end: Male JIC, 37° flare (SAE J514)
• ORB end: Male adjustable ORB with jam nut, backup washer and O-ring (SAE J1926)
• Shape: 90° elbow
• Interchange: 6801 / Nuvo 5515 (e.g. 6801-08-08 = 5515-8-8)
• No tape or pipe dope needed on the ORB end

Installing the adjustable end

Back the jam nut off as far as it goes, then thread the ORB end into the port until the backup washer touches the port face. Turn the elbow back, no more than one full turn, until the JIC end points where you need it. Hold the body with a wrench and tighten the jam nut.

How to choose your size

Sizes are listed as JIC × ORB, so 8x6 has a -08 JIC end and a -06 ORB end. The dash number is the size in sixteenths of an inch: -08 = 8/16" = 1/2" tube. JIC and ORB use the same UNF thread for each dash size.

Not sure which size you need? Measure the thread OD and count threads per inch, or send us your existing part number (Nuvo, 6801 or other brand) and we'll match it.